explosion proof air conditioners

MATTICKS INDUSTRIES, INC.

explosion proof air conditioners

tticks I

KOOLGUARDTM

WALL MOUNT AIR CONDITIONING

FOR HAZARDOUS LOCATIONS

HEATPUMP

CLASS I, GROUP BCD, DIVISION 2


Intrinsically Safe Self Contained Controls

Heatpump

230 Volt 1Ph , 230 Volt 3Ph, 460 Volt 3Ph @ 60Hz

Controls:

Controls are located on the return air grill. These controls can be removed for remote mounting (controls come with 8' of intrinsic safe cable)

Features:

19 ETL Listed Models for Hazardous Locations....

Heavy duty ultra-quite operation for versatile applications such as new construction, modular analyzer shelters, control rooms, electronic equipment shelters, battery roms, chemical storage containers, and many other hazardous locations that require environmental control.

Aluminum finned copper coils: Grooved tubing and enhanced louvered fin for maximum heat transfer and energy efficiency.

Twin indoor blowers: Move air quietly. Single speed blower motor provides maximum room circulation and low static operation.

Compressors: Reciprocating compression designed to withstand higher compressor ratios. Scroll compressors for increased efficiency, quieter operation and reliability on 4 and 5 ton models.

Electrical components: Electrical components are enclosed in approved explosion proof enclosures within the unit and are easily accessible for routine inspection and maintenance.

Dust Filters: One inch disposable air filters are standard with the return air filter grill and are replaceable from the room side.

Fresh Air make up: Barometric fresh air dampers are standard on all units, allowing up to 25% outside fresh air where needed. Where closed loop circulation is required this damper is permanently closed. Fresh air from a safe location above the roof line is furnished using a volume controlled filter plenum and stack. Also offered is our stack support designed for stacks up to 25' above grade without the use of guy wires.

Full length mounting brackets: For improved appearance and easy installation. Note: Bottom mounting bracket included to assist in installation.

Cabinet finish with a baked on beige enamel, which allows it to withstand 1000 hours of salt spray

Unit panel controls can be removed from the return grill and located away from the air flow

Rain Flashing supplied with each unit

Options:...COATINGS

Polyurethane enamel corrosion protected hermetic system, includes evaporator coil, condenser coil, compressor, and all connecting tube

Polyurethane enamel coating of entire unit. Custom colors available

Fresh Air Plenum and Stack with Rain Cap

Loss of flow Alarm Contacts

Low Ambient Control

Stainless Steel Housing

Heatpump Models :

19,000 BTU to 56,000 BTU @ 230/208 Volt 1Ph 60Hz

23,600 BTU to 56,500 BTU @ 230/208 Volt 3Ph 60Hz

23,600 BTU to 56,500 BTU @ 460 Volt 3Ph 60Hz

SPECIFICATIONS - 230/208 Volt 1Ph UNITS

 MODEL  COOL/HEAT
BTU/HR
 ELECTRICAL CHARACTERISTICS    CIRCUIT RATING  EER  AIR MOVING CAPACITY  WEIGHT NET
 COOL  HEAT  VOLTS/PH   AMPS   WATTS
 MBY223A-BCD  23600  23200  230/208/1  12.2/13.2   2800/2740  25A  10.5  905 CFM  398
 MBY230A-BCD  30000  28000  230/208/1  16.6/17.7   3810/3680  35A  10  1270 CFM  463
 MBY235A-BCD  35600  34400  230/208/1  20.0/20.7   4600/4300  40A  10  1270 CFM  478
 MBY241A-BCD  41500  41000  230/208/1  24.1/26.2   5540/5440  50A  10  1665 CFM  608
 MBY247A-BCD  47000  46000  230/208/1  27.8/28.8   6390/5990  50A  10.5  1665 CFM  608
 MBY256A-BCD  56500  58000  230/208/1  31.9/35.4   7330/7360  70A  10.2  1900 CFM  608
               

SPECIFICATIONS - 230/208 Volt 3Ph UNITS

 MODEL  COOL/HEAT
BTU/HR
 ELECTRICAL CHARACTERISTICS    CIRCUIT RATING  EER  AIR MOVING CAPACITY  WEIGHT NET
 COOL  HEAT  VOLTS/PH   AMPS   WATTS
 MBY223B-BCD  23600  23200  230/208/3  9.1/9.8   3620/3520  20A  10.5  905 CFM  398
 MBY230B-BCD  30000  28000  230/208/3  11.8/12.4   4690/4460  20A  10  1270 CFM  463
 MBY235B-BCD  35600  34400  230/208/3  13.5/14.2   5370/5100  35A  10  1270 CFM  478
 MBY241B-BCD  41500  41000  230/208/3  18.0/18.9   7160/6800  35A  10  1665 CFM  608
 MBY247B-BCD  47000  46000  230/208/3  19.3/20.5   7670/7370  40A  10.5  1665 CFM  608
 MBY256B-BCD  56500  58000  230/208/3  22.3/25.9   8870/9310  50A  10.2  1900 CFM  608
               

SPECIFICATIONS - 460 Volt 3Ph UNITS

 MODEL  COOL/HEAT
BTU/HR
 ELECTRICAL CHARACTERISTICS    CIRCUIT RATING  EER  AIR MOVING CAPACITY  WEIGHT NET
 COOL  HEAT  VOLTS/PH   AMPS   WATTS
 MBY223C-BCD  23600  23200  460/3  6.4   5090  10A  10.5  905 CFM  398
 MBY230C-BCD  30000  28000  460/3  7.3  5800  10A  10  1270 CFM  463
 MBY235C-BCD  35600  34400  460/3  7.7  6120  15A  10  1270 CFM  478
 MBY241C-BCD  41500  41000  460/3  9.4   7480  15A  10  1665 CFM  608
 MBY247C-BCD  47000  46000  460/3  10.4  8270  20A  10.5  1665 CFM  608
 MBY256C-BCD  56500  58000  460/3  11.9  9470  20A  10.2  1900 CFM  608
               

DEMINSIONAL SPECIFICATIONS

 MODEL  LENGTH  HEIGHT  DEPTH  SUPPLY AIR OPENING  RETURN AIR OPENING
 18,000 - 23,000 BTU  34 7/8"  70 1/2"  16 7/8"  19 7/8" x 7 7/8"  19 7/8" x 11 7/8"
 30,000 - 36,000 BTU  39 7/8"  70 1/2"  16 7/8"  27 7/8" x 7 7/8"  27 7/8" x 13 7/8"
 43,000 - 57,500 BTU  43 7/8"  84 7/8"  22 1/2"  29 7/8" x 9 7/8"  29 7/8" x 15 7/8"
 67,000 - 69,500 BTU  43 7/8"  94 7/8"  22 1/4"  29 7/8" x 9 7/8"  29 7/8" x 15 7/8"
           


 

HOME PAGE